RC Rock Crawler Berg In Action
Yes, so much we like about RC Scale Trucks, we just cannot stop admiring this real rock crawler chassis, Berg in action. This is one of the best crawler setup if not the champion of them all. Just watch the video, where else it cannot go?
Vanquish Products Incision Chassis @ Daniels Park, CO from tmageephoto on Vimeo.
The crawler setup:
Specs on the current setup:
Chassis: Vanquish MOA Incision
Axles: Berg…* Super300 cvds up front,
* RC Axlemaster 4340 shafts in rear,
* VP high steer knuckles,
* Fubar lockouts.
* 13t front pinion, 12t rear.Suspension/Steering setup:
* Front shocks: Traxxas #2660, 35wt oil, soft blue integy springs
* Rear shocks: Losi, 35wt oil, Losi grey springs
* Lower links: Traxxas #5318, bent in a vise…with jato rod ends to adjust WB
* Steering is still the same as page 1.
* front link/shock mounts are still the same ones I made on page 1.Wheels & tire setup:
* Front: VP DH procomps with 460 hubs fully loaded standard weights, HB Rovers(white) with stock foam and 1/2 losi foam on outside edge.
* Rear: VP SLW 1″ with 225 hubs, HB Rovers(white) with Losi foam.Electronics:
* Mamba Max
* CCBEC
* Brood 45t CreepTs
* Punk Dig switch
* Hitec 7950
* TP 1350 30C 3S packs
* DX3RTrack width in the front is about 11″.
Track width in the rear is about 10.125″
WB is about 12.4″
GC is 3.25″ at ride height, 3.5″ full droop.
Vanquish Products Berg in Daniels Park…Part 2! from tmageephoto on Vimeo.
